Infected


You are here: [VPN Killswitch guide]
Click [HERE] to return to the Homepage

Note: This method will only work with VPN providers who use the TAP adapter.
Note: A command prompt (CMD) is opened by holding WIN+R and typing cmd.
Note: You will need to install Comodo Firewall, available here: comodo.com

Part1. Finding the Mac Adress.
First thing you'll need is a VPN Provider, if you do not already have it, buy it.
If you're not sure if your VPN Provider's client uses the TAP adapter, you can do the following, open a command prompt and type "ipconfig /all" without quotes!
This will show you wich adapters are installed, search for TAP-Windows Adapter.

Once you have found the specified adapter, you will need to write down the Mac Adress, where it states "Physical Address" is where the Mac Adress is.
For example, 00-FF-XX-XX-XX-XX.
It is important you write down the Mac Adress of the right adapter!

Part 2. Configuring the KillSwitch.
The First thing we will to do is right-click the comodo icon in the taskbar and select "Advanced View" after that go to: Firewall > Network Zones.

Now we're going to add a new network zone, to do this click on the "Add" button.
And Click on "New Network Zone" name your new network zone and click "OK"
Select your created network zone, right-click and select add and New Adress.
Click the dropdown menu select"Mac Adress" and enter the Mac adress from Part 1.

After that we are going to make a ruleset, navigate to: Firewall > Rulesets.
Click the "Add" button, name it and click on the "Add" button.
Now a windows will pop up with a few options, apply the following options:

For "Action" from the dropdown we're going to select "Block"
For "Protocol" we will select "IP"
For "Direction" select "In or Out"
For "Type" (Under the Source Adress tab) we will select "Any Adress"
For "Type" (Under the Destination Adress tab) select "Any Adress"


For The next rule the settings will be as follows:
For "Action" from the dropdown we're going to select "Allow"
For "Protocol" we will select "IP"
For "Direction" select "Out"
For "Type" (Under the Source Adress tab) we will select "Network zone"
And then select the network zone you created earlier.
For "Type" (Under the Destination Adress tab) select "Any Adress"


And for the last rule we will use these settings:
For "Action" from the dropdown we're going to select "Allow"
For "Protocol" we will select "IP"
For "Direction" select "In"
For "Type" (Under the Source Adress tab) select "Any Adress"
For "Type" (Under the Destination Adress tab) we will select "Network zone"
And then select the network zone you created earlier.


We're almost done! last thing we have to do is navigate to:
Firewall > Application Rules, click "Add" select "Browse" and navigate to
the .exe file of the program you want to force through the VPN Connection.

Reboot your computer and you're ready to go!
Note: Now dont forget to connect to your VPN!
The firewall will deny all connections to the defined applications.
Except the connection of the VPN provided!

[PRINT] - [HOME]
This page is a snapshot of ZeroNet. Start your own ZeroNet for complete experience. Learn More